LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4" Clean (1" Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma Cutter
LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4" Clean (1" Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma Cutter - Image 3
LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4" Clean (1" Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma Cutter - Image 4
LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4" Clean (1" Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma Cutter - Image 5
LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4" Clean (1" Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma Cutter - Image 6
LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4" Clean (1" Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma Cutter - Image 7
temp-image

LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4″ Clean (1″ Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma Cutter

Amazon.com Price: $549.98 (as of 10/02/2026 08:47 PST- Details)

63A Cutting Power (Shop/Fab): Up to 3/4″ clean and 1″ sever on suitable materials with reduced slag and minimal post-grind.
Non-HF Blowback + Pilot Arc (Auto/Body): Low-EMI, reliable starts through paint, rust, and expanded mesh for cleaner pierces and consistent kerfs.
CNC-Ready Interface (CNC Table): Pre-installed CNC port outputs THC and ARC OK signals for straightforward hookup and automated, repeatable cuts.

🚚 Free Delivery!
Delivery time is calculated at checkout based on your location. 🚚✨

Tracking information provided within 48 hours! 📦✅

 

 

Category:

63A Cutting Power (Shop/Fab): Up to 3/4″ clean and 1″ sever on suitable materials with reduced slag and minimal post-grind.
Non-HF Blowback + Pilot Arc (Auto/Body): Low-EMI, reliable starts through paint, rust, and expanded mesh for cleaner pierces and consistent kerfs.
CNC-Ready Interface (CNC Table): Pre-installed CNC port outputs THC and ARC OK signals for straightforward hookup and automated, repeatable cuts.
Drag-Cut Control (HVAC/Thin Sheet/Art): Glide the torch on the work surface for smooth templates and freehand lines; use LOTOS DC6309 drag consumables (sold separately) for best edges.
Dual-Voltage Flex (Garage/Jobsite): Auto 110/120V or 220/240V; typical 120V up to 3/8″ clean (1/2″ sever), 240V up to 3/4″ clean (1″ sever)—work with the power you have.
LED Panel Tuning (Quality/Consistency): Set Pilot-Arc 6–15 s and Post-Flow 2–10 s; input-pressure reminder helps stabilize the arc and extend torch life.
Power & Air (Shop Standard): Recommended breakers 50A @120V / 40A @240V; clean, dry air ≥70 PSI @ ~4.0 SCFM for reliable starts and cleaner edges.
Materials & Uses (Real Jobs): Cuts stainless, alloy/mild steel, aluminum, and copper for patch panels, trailers, farm repairs, HVAC panels, metal art, and small-shop fabrication.

Manufacturer

Part Number

Item Weight

Package Dimensions

Item model number

Size

‎63A CNC
Power Source

Voltage

Item Package Quantity

Included Components

Batteries Required?

Date First Available

Brand

Reviews

There are no reviews yet.

Be the first to review “LTP6300DCNC | 63A CNC-Enabled Plasma Cutter, Drag-Cut Enables, Non-HF Blowback Pilot Arc, 3/4″ Clean (1″ Sever), THC/ARC OK, Dual-Voltage 110/220V, LED Controls, Portable Air Plasma Cutter”

Your email address will not be published. Required fields are marked *

Related products